SAHP BMTB 130 - SECTION 9 USING THE CONTROLLER; Controller Interface and Buttons

28| SAHP - BMTB Installation Manual
V1 Mar 2019US - SD667052
SECTION 9
USING THE
CONTROLLER
!
Fig 10
Using the
BMTB
!
DESCRIPTION
PBUTTON
UPBUTTON
DOWNBUTTON
ACTION
Press to show
SP program mode
to change operating
temperature of the
compressor
Increases the
temperature
Decreases the
temperature
COMMENTS
The temperature of
the compressor is
pre-set at 130°F
Neverexceed130°F
in Standard mode.
Neverexceed140°F
in Eco mode.
Blue colour breakdown
CMYK cyan: 68, magenta: 46, yellow: 0, key: 3
RGB 79, 134, 247
Hex #4f86f7