Need help?Do you have a question about the SAHP BMTB 130 and is the answer not in the manual?
Covers general warnings for lifting, product use by children, and importance of supervision.
Stresses reading manuals, installation by qualified persons, and pressure testing requirements.
Details minimum incoming cold water pressure, flow rate, and pressure reducing valve settings.
Covers panel location, orientation, fixing, and connections to the BMTB unit.
Outlines nitrogen pressure testing procedures and filling the system to 115psi.
Details vacuuming the system and releasing the factory pre-charged refrigerant.
Covers power supply, wiring, earthing, and compliance with electrical standards.
Guides on converting units, setting temperatures, and configuring the controller's real-time clock.
Details annual service requirements for safe operation and optimum efficiencies.
Lists common issues like screen errors, system start/stop, and their causes.
General| Model | BMTB 130 |
|---|---|
| Category | Water Heater |
| Type | Storage |
| Capacity | 130 liters |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Max Water Temperature | 75°C |
| Heating Power | 2000 W |
To Next Page
