05/31/2017 Sailsh1900BBOwner’sManual|sailshboats.com 18
Livewell Operation
Instructions
• Make sure the seacock below the baitwell pump is in the open position.
• Turn on the livewell switch.
• Adjust the black aerator in each livewell to the desired ow (shown in
CLOSED picture).
• You can operate both at the same time or just one by adjusting the ow.
• In order to ll the livewell, place the stand pipe with the strainer into the
drain hole.
• To drain the livewell remove the stand pipe and the water will ow out
the drain hole.
CLOSED