Sailfish 236 CC - Marine Head Programming: Mode Selection; Water Refill Programming; Mode Switching Instructions

03/20/2017 Sailsh236CCOwner’sManual|sailshboats.com 27
Optional Marine Head - Tecma Nano Premium Plus
Enter Water Rell Pro-
gramming Mode
• Press and Hold both buttons for 3
seconds.
• LEDs will ash, programming mode
will be entered.
Marine Mode
• Within 3 additional seconds of enter-
ing programming mode, remove both
ngers.
• LEDs stop ashing
• Toilet will now rell only trap at the
bottom of the bowl.
Residential Mode
• Continue to Press and hold both
buttons, toilet will begin to add water.
• Release both buttons after 4 or 5
seconds (recommended to minimize
water use.
• LEDs stop ashing
• This sets the amount of water that will
be used in future ushes.
To switch modes of operation go to the
top of diagram and enter water rell
programming mode.