SAILFISH 245 DC |
21
Plug and Play Wiring
Deutsch Connectors are quick disconnect
plugs used for durability and ease of replacing
components in your Sailfish Boat.
These water resistant plugs are for use in
electrical systems where moisture, salt spray,
dirt and dust could affect the electrical con-
nections or systems.
Fuel-Water Separator
Sailfish installs water fuel separators in the bilge
compartment on all models rigged with Yamaha &
Suzuki engines. Each engine will have its own filter,
which can be accessed through the bilge access
doors in the back of the boat.
On Sailfish boats rigged with Mercury engine(s),
the fuel-water separator(s) may be built into the
engine - depending on the engine Model.
For more information on these filters, please review
your Yamaha, Mercury or Suzuki Owner’s Manuals.
OWNER'S MANUAL - WIRING & FUEL MAINTENANCE
To Next Page
Loading...
