SAILFISH 245 DC |
25
OWNER'S MANUAL - RAW WATER WASHDOWN SYSTEM
The raw water washdown on your Sailfish Boat is
powered by a Shur-flo Pro Blaster Pump which
creates a pressurized system, once the pump is
turned on and pressure is created the pump will
shut down until more pressure is needed.
The raw water washdown pump can be accessed
through the bilge access door in the aft of the
boat. The raw water washdown system uses the
same seacock as the livewell, it is accessed in the
bilge area. To operate make sure the seacock is in
the open position.
The hose fitting for the washdown is located in the
transom splash well, to use simply attach a hose
with a nozzle and turn the switch on. Pressure
will build up in the hose and the nozzle and as
you spray the pump will continue to engage as
needed.
THIS PUMP HAS A BUILT-IN STRAINER THAT MUST
BE CHECKED AND CLEANED REGULARLY TO
MAINTAIN PROPER FUNCTION.
To Next Page
Loading...
