Sailor 6248 - Drilling Plan for Desktop and Overhead Installation; Cutout Template for Flush Mounting; How to Install the SAILOR 6090 Power Converter; System Configuration Example

Flush mount template
Remove material from shaded area only!
99-132034
89mm
227mm
R2.5mm x 4
info@thrane.com
•
thrane.com
98-132282-B
Scale 1:1
Cutout template for flush mounting of the VHF
IMPORTANT!
If this template was printed from an electronic
file or copied, scaling (1:1) may not be correct.
Consequently do not attempt to use a printed
or copied template without prior checking of
dimensions.
System Configuration - Example
Drilling plan on desktop and overhead
How to install the SAILOR 6090 Power Converter
99-131985
200mm
53mm
71mm
247mm
9mm
4 x M4 or hole for
self-tapping ø3.9
23.5mm
VHF
99-133232-A
SAILOR 6248/6249
Handset
SAILOR 6201/03
Power Converter
SAILOR 6090
12V DC
ACC
Handset
SAILOR 6201/03
Ground
12V DC
+Vout (Red)
-Vout (Blue)
Remote on/off
NC
Screen/Ground
-Vin
+Vin
24V DC
Remove jumper
for remote on/off
from VHF
Aerial
RX/TX
24V DC
Drilling plan
For further information, please download the installation
manual part no. 98-135548 at http://esupport.thrane.com