Instruments and controls 1-11
HEAD LIGHT, DIMMER
AND TURN SIGHAL
SWITCH
Lighting
Turn the switch to the
“ ”position:
The clearance, tall, license plate
and instrument lights will come
on.
Turn the switch to “ ”position：
Headlights will come on and all
the other lights remain on.
To select the high beam, push
the lever forward. Pull it back to
select the low beam.
The buzzer will alarm if you
select the high beam and the
driver’s side door isn’t locked
well. Don’t worry, please turn off
the high beam or lock the
driver’s side door well to turn off
the alarm.
Passing signal
Pulling the lever forward you will
turn on the passing signal even
when the headlight switch is off.
Turn signal light
Move the lever or down to signal
to the turning direction. When
the turn is completed, the turn
signals conceal automatically.
Lane change signal
To indicate a lane change, move
the lever up or down to the point
where lights begin flashing.
To Next Page
Loading...
