Saipa Rich - Page 60

4 Heater, air conditioner and audio system
2. Move the air control lever/dial
to the” ”position.
3. Turn on the fan control
lever/dial.
4. Move the temperature control
lever/dial to the desired
position.
Defrosting or defogging
This mode is used to
defrost/defog the windows.
1. Move the air intake lever to
the” ” position, or push
the” ” button to the off
position.
2. Move the air control lever/dial
to the” ” position.
3. Turn on the fan control
lever/dial.
4. Move the temperature control
lever/dial to the desired
position between the middle
and the “HOT” position.
5. Push on the air conditioner
button. The indicator light will
come on.
Bi-level heating
This mode directs outside air from
side and center vents and hot air
from the floor outlets.
1. Move the air intake lever to
the” ” position, or push
the” ” button to the off
position.
2. Move the air control lever/dial
to the” ”position.
3. Turn on the fan control
lever/dial.
4. Normally move the
temperature control lever/dial
to the midpoint between
"HOT" and "COLD".
Heating and defrosting
This mode heats the interior and
defogs the windshield.
1. Move the air intake lever to
the” ” position, or push
the” ” button to the off
position.
2. Move the air control lever/dial
to the” ”position.
3. Turn on the fan control
lever/dial.
4. Move the temperature control
lever/dial to the desired
position between the middle
and the “HOT” position.
Operating tips
Clear snow and ice from the
wiper blade and air inlet in front
of the windshield. This will
improve heater and defroster
operation.