Appearance and interior care 6-3
A damp chamois can be used to
dry the vehicle to avoid water
spots.
Waxing
Regular waxing protects the
paintwork and keeps the finish.
After waxing, polishing is
recommended to remove built-up
residue and avoid a “weathered”
appearance.
The dealer can assist you in
choosing the proper product.
Wax your vehicle only after
a thorough washing. Follow the
instructions supplied with the
wax.
Do not use a wax
containing any abrasives,
cutting compounds or cleaners
that may damage the vehicle
finish.
If the surface does not
polish easily, use a “road tar”
remover and wax again.
Machine compounding or
aggressive polishing on a base
coat/clear coat paint finish may
dull the finish or leave swirl marks.
Only apply black wax or black
shoe polish to the black urethane
or polypropylene bumper.
Removing spots
Remove tar and oil spots,
industrial dust, insects and tree
sap as quickly as possible from
the surface of the paint to avoid
lasting damage or staining.
Special cleaning products are
available at your PARSKHODRO
dealer or any automotive
accessories store.
Underbody
In areas where road salt is used in
winter, it is necessary to clean the
underbody regularly in order to
prevent dirt and salt from building
up and causing corrosion on the
underbody and suspension.
Before the winter period and
again in the spring, the under seal
must be checked and, if
necessary, re-treated.
Cleaning glass
Use glass cleaner to remove
smoke and dust film from the
glass surfaces. It is normal for
glass to be coated with a film after
the vehicle is parked in the hot
sun. Glass cleaner and a soft
cloth will easily remove this film.
When cleaning the inside of the
window, do not use any
sharp-edged tools or abrasive
cleaners or chlorine-based
disinfectant cleaners. These may
damage the electrical conductors,
radio antenna elements or rear
window defogger elements.
Cleaning alloy wheels
Wash regularly, especially during
winter months in areas where
road salt is used. Salt could
discolor the wheel if not removed.
Chrome parts
Clean all chrome parts regularly
with a nonabrasive chrome polish
to maintain the finish.
Plastic parts
Plastic parts can be cleaned with
a mild soap solution. If the dirt
cannot be easily removed, use a
plastic cleaner. Do not use any
solvents.
To Next Page
Loading...
