12
faQs
: ?
Power adapter may not be properly plugged in; ensure that
the power adapter is properly plugged into the DC power
jack and the electrical source.
: ?
There may not be enough water in the water tank; ensure
that the water tank is lled to the maximum water level line.
The water level may be too high (higher than the maximum
water level line); pour out excess water and try again.
The ceramic disc may require cleaning. Please see "Care &
Maintenance" instructions.
: ?
To prevent damage to the unit, it's recommended to use
room temperature tap water. To prevent clogging and
damage to the ceramic disc, always use clean water.
To Next Page
