6
operating instructions
1. Connect power adapter to
DC power jack on bottom of
unit before filling the water
tank with water.
3. Using the measuring cup
provided, fill water tank with
room temperature tap water
to no higher than max. water
level line (180 ml/6 fl. oz.). Tilt-
ing the unit can cause water
to run into the diffuser’s ven-
tilation system and out the
bottom — to ensure correct
usage, always bring water to
your ultrasonic diffuser and
not the other way around.
max. water
level line
2. Remove the cover from the
base to expose water tank.
To Next Page
Loading...
