15
faqs
Q: what if my unit does not turn on?
Power adapter may not be properly plugged in; ensure
that the power adapter is properly plugged into the DC
power jack and the electrical source.
Q: what if my unit does not mist or there is almost no
mist?
During first time use, the unit may take up to 20 minutes
to reach its full mist potential.
There may not be enough water in the water tank; ensure
that the water tank is filled to the maximum water level
line.
The water level may be too high (higher than the maxi-
mum water level line); pour out excess water and try again.
The ceramic disc may require cleaning. Please see "Care &
Maintenance" instructions.
Q: what type of water should go into my ultrasonic
diffuser?
To Next Page
Loading...
