6
operating instructions
2. Remove the water tank
cover from the base to
expose water tank.
1. Connect power adapter to DC
power jack on bottom of unit be-
fore filling up water tank(s).
3. Fill the East and West water tanks with
room temperature water to no higher
than the maximum water level line (7
fl. oz./210 ml). Tilting the unit can cause
water to run into the diffuser’s ventila-
tion system and out the bottom — to
ensure correct usage, always bring wa-
ter to your ultrasonic diffuser and only
pour into the tank's indicated sections.
To Next Page
Loading...
