1
Pump installation and warranty
guide for pumps RGP, RHP, RSP and ESP
Important – read this first!
Correct installation is the guarantee of safety and a
trouble free system. It is therefore important to read these
instructions thoroughly and ensure you comply with them.
Incorrect fitting can invalidate the warranty.
Pages 10 to 11 of this manual provide clarification of some of the more
unusual installation requirements. If your installation is complicated
or you have any questions please CONSULT THE PUMPWISE HELPLINE
IMMEDIATELY. If you are calling from site and need urgent technical
guidance, please let us know – and we will prioritise your call.
We encourage installers to consult the Salamander helpline, where
our engineers can give you first-rate advice regarding installation.
Consulting the helpline will entitle your customer to an additional year’s
warranty FREE (UK only) – all you have to do is call us, implement our
engineers recommendation for your installation situation, then ask your
customer to register.
When the job is finished – tear off the final page of this instruction
manual and hand it to the householder. This page explains the warranty
provisions and provides a pre-paid warranty card.
Don’t forget that if you have called our helpline you should also
complete the comments section of the card to say how you rate the
service you received.
Please leave this installation guide with the customer for
reference to maintenance and safety information.
Thank you for choosing
Salamander Pumps
!
Contents
Pre-installation checklist 2
Typical installations
RSP and RHP pumps 6
ESP CPV pumps
System operation and L.E.D. indication 7
Typical installations
ESP CPV pumps 10
Commissioning 12
Helpful PumpWise guidelines 13
Cold water supplies and storage
Helpful PumpWise guidelines 15
Water starvation protection, pipework
arrangements and stored hot water
General specifications 19
Trouble shooting 20
PumpWise and warranty 22
To the installer 23
SAL6479 Pumps Install DocAW1 .indd 2-1 29/09/2011 11:27