Salamander RGP - User Manual

Pre-installation
Installation
PumpWise guidelines
General specification
Trouble shooting
PumpWise and warranty
ISSUE 14 September 2011
Pump installation and
warranty guide for pumps
RGP, RHP, RSP and ESP
PERF
Salamander Pumped Shower Systems Limited Unit 2c Colima Avenue, Sunderland, SR5 3XE Tel: 0191 516 2002 Fax: 0191 548 4445 Email: service@salamanderpumps.co.uk
6479
Warranty card Please use block capitals: 1 User name Address Postcode Tel No. Email address 2 Installer name Address Postcode Tel No. Email address 3 Supplier from whom pump was purchased Name Address Postcode 4 What is the approximate cold water storage capacity (in gallons)?
Pump serial number
Model Date of
purchase
_____
/
_____
/
_____
5 Where is the pump situated? How far is it from the hot water cylinder? 6 Does the pump have dedicated hot and cold water feeds (not shared
with other services) YES
M NO M
7 Does the hot water cylinder have a flange fitted? If yes, what type?
YES M NO M Type
8 Does the hot water cylinder have a temperature control fitted? If yes,
what temperature is the cylinder stat set to? YES
M NO M Temperature
11 Why did you choose a Salamander pump? Comments I am interested in an extended warranty.
M Please tick box
Please send details of the Extended Warranty Scheme
and application form.
SAL6479 Pumps Install DocAW1 .indd 1-1 29/09/2011 11:27

Summary

Pre-Installation Requirements

Pre-installation Checklist

Key do's and don'ts for pump installation, covering location, electrical, and plumbing.

Location and Environment

Details pump placement, cooling, ventilation, and frost protection requirements.

Water Supply Connections

Instructions for connecting hot and cold water supplies, including storage and temperature.

Plumbing and Electrical Setup

Covers anti-vibration couplers, general plumbing rules, and electrical connection requirements.

Typical Pump Installations

RSP and RHP Pump Types

Guidance on selecting and installing Right Shower Pumps (RSP) and Right Whole House Pumps (RHP).

ESP CPV Pump Scenarios

Illustrates typical installations for ESP CPV pumps in various domestic setups.

ESP CPV Pump Operation and Modes

System Operation and LED Indication

Explains ESP CPV pump operation, LED fault indicators, and critical system notes.

Negative Head Systems Explained

Defines negative head systems and their characteristics, including typical applications.

Setting Pump Operation Modes

Step-by-step guide to setting the ESP CPV pump for negative or positive head operation.

Commissioning and Installation Guidance

Commissioning Procedures

Steps for flushing, filling, testing, and ensuring correct pump operation after installation.

PumpWise Installation Support

Details the PumpWise helpline, guidelines, and benefits for installers and customers.

Specific Unit and System Considerations

Covers pre-plumbed units, tank types, and specific system requirements like water hammer.

Pump Performance and Troubleshooting

Pump Hunting Protection and Specs

Discusses pump hunting, general specifications, and performance parameters.

Troubleshooting Common Faults

Provides a fault-finding guide with probable causes and recommended solutions for pump issues.

Warranty and Installer Information

PumpWise Commitment and Warranty

Details the standard warranty, extended warranty options, and the PumpWise helpline commitment.

Guidance for Installers

Instructions and terms for installers regarding warranty cards and product installation.

Salamander RGP Specifications

General

Category	Water Pump
Model	RGP
Inlet/Outlet	1 inch
Max Flow Rate	60 lpm
Inlet/Outlet Size	1 inch