Salind 01 4G - Connection to Vehicle; Installation

6
7
1.4 Connection to vehicle
Please note the following points, before connecting to the
vehicle:
• SIM card already placed in the Salind 01 4G
• The tracker should not be attached to gasoline lines or
other flammable components
• No other components on your vehicle should be dama-
ged by the attachment
• By installing the tracker on the vehicle battery, it is possible
that this will be discharged to power the Salind 01 4G. If
you regularly use your vehicle, this should not be a problem
with a functioning battery, as it is constantly recharged by
driving. If this is not the case, please check before connec-
tion whether your battery has a discharge protection and,
if necessary, retrofit this. In idle state, the tracker requires
about 10-20 mAh.
NOTE!
Please always observe the manufacturer‘s specifica-
tions for your vehicle. Claims for damages for improper
connections are excluded.
1.5 Installation
Connect the tracker via
the black plug function
to the wiring harness.
1.
3.
Connect the tracker to
the battery. Connect the
red cable with the fuse
to PLUS (+). Connect the
black cable to Minus (-).
Mount the tracker with the
help of the adhesive strip in
the engine compartment.
2.