8
9
1.6 Start-up
WARNING!
The poles must not be swapped under any circumstances!
Red cable
Black cable
-
+
Battery
9-75 V
-
+
If the activation was successful, you can start the Salind 01
4G. When connected to the power supply, the tracker will
switch on.
NOTE!
By connecting to the power supply, the tracker turns on
immediately and the LED lights give a signal. If the de-
vice is not connected to the vehicle battery but to anot-
her location (e.g., fuse box), this may cause the ignition
on/off function to be not accurately recognized.
NOTE!
After you have successfully installed the Salind 01 4G in
your vehicle, it is advisable to move the vehicle for some
time. For example, drive the car briefly to go shopping.
This allows the device to log into the correct network
faster and establish a first connection.
To Next Page
Loading...
