Installation and operating instructions Salmson SCX-DCX / SXM-DXM / SXS / NSB-S 31
English
3 Transport and interim storage
On arrival, immediately check the product and its packaging for damage in tran-
sit. If damage is found, the necessary actions involving the forwarding agent
must be taken within the specified period.
CAUTION! Risk of injuries to personnel and damage to the product!
Incorrect transport and interim storage can cause damage to the product and
injury to personnel.
• The pump and its packaging must be protected against moisture, frost and
mechanical damage during transport and interim storage.
• Packaging that has become weakened loses its strength and call allow the
product to fall out, causing injury to personnel.
• When the pump must be transported, it may be carried only by the motor/
pump housing. Never carry it by the module/terminal box, cable or external
capacitor.
4Intended use
Circulation pumps are used for delivering liquids in
• hot water heating systems
• underfloor heating
• cooling and cold water circuits
• closed-circuit industrial circulation systems
WARNING! Health hazard!
Because of the materials used in their construction, pumps of the
SCX-DCX / SXM-DXM range are unsuitable for use in applications involving
drinking water or foodstuffs.
Pumps of the NSB-S and SXS range are additionally suitable for use in
• drinking water circulation systems
To Next Page
Loading...
Need help?
General
