Salto XS4 CU4200 - User Manual

All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
© 2017 SALTO Systems S.L.
224901-ED2.- 07/07/2017
XS4 Controller
Installation guide
XS4 Controller
E
Installation guide
Guía de instalación
Guide d'installation
Eng
F
CU42xx.. series
Mechanical Installation Instalación mecánica Installation mécanique
Eng
F
E
CU42E0
CU4200
TAMPER
Electric box with tamper switch.
Caja eléctrica con detector de intrusión o tamper.
Coffret électrique avec interrupteur anti sabotage.
This installation type is not UL evaluated.
E
Eng
F
CU42E0T - CU42E0G - CU4200T - CU4200G
CU42E0T00 - CU42E0G00 - CU4200T00 - CU4200G00
1 2 3
1/20
READER 1
A
B
TAMPER
IN1
IN2
IN3
IN4
IN5
IN6
READER 2
RL1
RL2
RL3
RL4
C
NC
NO
C
NC
NO
C
NC
NO
C
NC
NO
BUS485
Ethernet
10Base-T
100Base-TX
ON
12V DC Input
+
A
B
-
12V DC Output (1A)
Power Input: 12V DC -1A
GND
GND
+
-
+
-
+
-
+
-
+
-
+
-
+
-
A
B
+
-
Model: CU42E0
104
(4-1/8")
121
(4-3/4")
43
(1-11/16")
10
(3/8")
44
(1-3/4")
131
(5-3/16")
Ø
4
(
5
/
3
2
"
)

Summary

Installation Guide

Mechanical Installation

Details on the physical mounting and installation of the XS4 Controller unit.

Electric Box with Tamper Switch

Information regarding the electrical enclosure and the tamper switch integration.

Factory Configuration

Input Connections

Details for connecting CUADAP or third-party readers using Wiegand, Omron, or RS232.

Supervised Input Connections

Explanation of supervised inputs and required resistance values.

Electrical Characteristics

Operation Conditions

Details environmental operating conditions for temperature and humidity.

Power Specifications

Information on input voltage, current consumption, and output current.

Cable Recommendations

Recommendations for Ethernet, BUS485, inputs, and readers cabling.

Installation Example

Cable Connection

Details on connecting cables with color codes for different wires.

RJ45 Installation Example

Illustrates an installation example using RJ45 connectors for readers.

Configuration

Address Configuration

Steps for configuring the IP address and network parameters for the CU42E0.

Device Identification

Setting up the MAC number and network name for the CU42E0 device.

Signaling

UL Statements and Compliance

Details on UL listed models, power supply requirements, and wiring standards.

Input Configuration

Input Connections

Details for connecting CUADAP or third-party readers using Wiegand, Omron, or RS232.

Supervised Input Connections

Explanation of supervised inputs and the definition of resistance values R1 and R2.

Dipswitch Setup

Configuration Example

Illustrates matching software configuration for dipswitch settings.

Salto XS4 CU4200 Specifications

General

Brand	Salto
Model	XS4 CU4200
Category	Controller
Language	English