BEFORE FIRST USE
Before using your Salton EX-15 for the first time wash all removable parts in
warm, soapy water, rinse thoroughly and dry. Run water through both sides of the
machine, the filter coffee side and the espresso side. Follow the directions as
described in each section, leaving out the coffee.
DESCRIPTION OF PARTS
1. Reservoir Lid for filter coffee
2. Water Level Indicator
3. Filter Coffee On/Off Button and Light
4. Swing-out Filter Holder
5. Filter Coffee Carafe
6. Keep Warm Plate
7. Boiler Cap
8. Espresso Strength Control Dial
9. Steam Control Knob
10. Espresso/Cappuccino On/Off Button
and Light
11. Steam Indicator Light
12. Espresso Filter Holder
13. Frothing Nozzle
14. Espresso Coffee Carafe
15. Removable Overflow Grid
16. Cup Adapter
17. Metal Filter
18. Cord Storage
MAKING ESPRESSO COFFEE
1. Plug your EX-15 into a 120 volt AC outlet. Make sure the Espresso Coffee
Light is Off and the Steam Control Knob is turned clockwise to the closed
position.
2. Unscrew the Boiler Cap by turning it counterclockwise.
3. Fill the Espresso Carafe with 2 to 4 cups of cold water using the carafe
markings for reference.
N.B.: When making Cappuccino add extra water to the Steam Cloud level for
2 cups or to the bottom of the metal band for 4 cups. Pour the water into the
Boiler. All water will be processed until the Boiler is empty. Therefore, pour
only as much water as you intend to use.
4. Screw the Boiler Cap securely in place by turning clockwise.
5. Place the Metal Filter into Filter Holder and fill to the desired level with
Espresso coffee.
N.B.: Markings inside the Filter indicate coffee level for 2 to 4 cups. Use a
fine drip grind coffee. If the coffee is too fine the flow of water through the
To Next Page
