SALUPO DRY CONTROL PLUS - Advanced Programming - Waiting Filling and Cosφ

IT IS USED TO SET A FILLING WAITING TIME WHICH
INTERVENES EVERY TIME THE MOTHERBOARD
DETECTS A DRY RUNNING CONDITION
OFF EXCLUDES THE
WAITING FILLING
MINIMUM COSFI
AUT. 0.68
MINIMUM COSFI
MAN. 0.68
MAN. IT INDICATES THAT
THE COS VALUE HASφ
BEEN SET MANUALLY
AUT. INDICATES THAT THE
COS VALUE HAS BEENφ
SET WITH THE AUTO-LEARNING
IT IS USED TO SET MANUALLY THE
COSφ VALUE UNDER WHICH
THE PUMP RUNS DRY
RANGE 1min ÷ 99h 59min
RANGE 0.04 ÷ 0.99
RANGE 1 ÷ 10s
IN 1 INPUT MODE THE EXTERNAL
COMMAND IS:
OFF G.MIN OPEN (DISABLE MOTOR)
ON G.MIN CLOSED (ENABLE MOTOR)
IN 2 INPUTS MODE THE EXTERNAL
COMMAND IS:
OFF G.MIN AND G.MAX CLOSED (DISABLE MOTOR)
ON G.MIN AND G.MAX OPEN (ENABLE MOTOR)
IN OFF MODE THE MOTHERBOARD
EXCLUDES THE CONTROL ON
THE EXTERNAL COMMAND
THIS SCREEN
IS DISPLAYED ONLY IF
THE WAITING FILLING
IS SET TO AUTOMATIC
IT SERVES
TO RESET THE FILLING
WAITING TIME
THE MOTHERBOARD AUTOMATICALLY CALCULATES
THE WAITING FILLING TIME IN FUNCTION OF THE
WATER PRESENT IN THE WELL
WAITING FILLING
ENTER TO RESET
WAITING FILLING
RESET
EXTERNAL COMMAND
1 INPUT
EXTERNAL COMMAND
1 INPUT
EXTERNAL COMMAND
2 INPUTS
EXTERNAL COMMAND
OFF
DRY RUN DELAY
4s
IT IS USED TO SET THE
INTERVENTION DELAY FOR
DRY RUNNING PROTECTION
DRY RUN DELAY
4s
WAITING FILLING
AUTOMATIC
WAITING FILLING
AUTOMATIC
WAITING FILLING
0 h 1 min
WAITING FILLING
OFF
ENGLISH
5. PROGRAMMING
23
5.2 Advanced programming