SALUPO DRY CONTROL PLUS - User Manual

Quadro elettronico avviamento diretto 1 motore per il controllo della marcia a secco (cosφ e
corrente minima) con display e sezionatore blocca porta.
Direct starting electronic control panel 1 motor for the dry running control (cosφ and
minimum current) with display and general disconnecting switch with door lock.
rev.8 10/03/2020
ITA/ENG
DRY CONTROL PLUS
SA604.xx / SA607.xx
MANUALE DI ISTRUZIONE E INSTALLAZIONE
INSTRUCTION AND INSTALLATION MANUAL
customer.service@salupoquadri.com
CUSTOMER SERVICE
( )
+39 0 941.1820216

Summary

General Instructions for Installing

Warnings

Highlights critical safety alerts regarding electrical hazards and personal injury.

Application Examples

Dry Running Cosφ (1 Input)

Shows a configuration for dry running control using one input.

Dry Running Cosφ (2 Inputs)

Demonstrates dry running control setup with two inputs.

Wiring Diagrams

Wiring Diagram SA604.xx

Detailed wiring layout for the SA604.xx model.

Wiring Diagram SA607.xx

Detailed wiring layout for the SA607.xx model.

Programming

Fast Programming

Guide to quickly set up basic parameters and auto-learning.

Advanced Programming - Waiting Filling and Cosφ

Detailed settings for waiting filling and minimum Cosφ configuration.

Advanced Programming - Current, Delay, and Button Modes

Configuration of current limits, delays, and manual button operations.

Advanced Programming - Voltage Settings

Settings for minimum and maximum operating voltage thresholds.

General Functioning of the Control Panel

Troubleshooting and Proposed Solutions

Data Logger

Alarm Data Logger

Details on viewing stored alarm events and associated motor hours.

Event Data Logger

Details on viewing recorded setup changes and motor hours.

Alarm Messages

Disposal of Electrical & Electronic Equipment

Declaration of Conformity

SALUPO DRY CONTROL PLUS Specifications

General

Brand	SALUPO
Model	DRY CONTROL PLUS
Category	Dryer
Language	English