Salus EVT7EU - Page 27

Other
Charger
Settings
e
Max Charge current
It shows the maximum charging current the EV charger can pro-
vide. (It is aected by both the SKU and the hardware setting
inside the EV charger).
f
Plug and Charge
When enabled, the EV charger can initiate charging without au-
thorization from App or NFC card.
Charging starts right away or after a while depends on if any
schedule or randomized delay is applied.
g
Charger Lock
When locked, the EV charger will not provide charging.
h
Randomized delay
When enabled, a randomized delay period (up to 10mins) is ap-
plied before starting any charging session.
i
Static load management
This setting can limit the EV charger’s output when needed.
j
Remove
Removes the EV charger from the user account.
k
Factory reset
Factory resets will clear all settings, including the
Wi connection to the home router. This reset will also remove
the EV charger from the current user account.
In App Settings for EV Charger 27