4
The installation, maintenance, & servicing of the charger must be performed only
by a qualied personnel per applicable local regulations. The installer must
ensure the installation follows local, regional and national regulations and guideline.
When using electric products, basic precautions should always be followed.
Turn o power at the circuit breaker before installing or cleaning the EV charger.
Do not install or use the EV charger near ammable, explosive, or combus-
tible materials, chemicals or solvents, gas pipes or steam outlets, radiators
or batteries, and areas that are easily get ooded, at high humidity or with
running water. Don’t spray any liquid into the charging socket or the charging con-
nector. Never submerge the charging connector in liquid. Do not open the cover in
rain.
Use the EV Charger only within the specied operating temperatures. It is
not recommended to install the charger in a position under direct sunlight or extreme
weather conditions.
Do not use the EV Charger if the enclosure or connector or socket is broken,
cracked, opened, or shows any indication of damage, or fails to operate. Do
not use if the charging cable is frayed, has broken insulation, or has any signs of dam-
age or the vehicle plug or electrical outlet is dirty. Do not touch the charging cable if
the connector emits smoke or begins to melt, if possible, stop charging.
Important Safety Information
Safety Information
To Next Page
Loading...