Sam4POS 6600/4800II Program Manual v2.12 Program Mode • 71
PLU Programming
This is where new items are added to the database and existing items can be maintained or deleted.
Each PLU is assigned a descriptor, Price, Cost, PLU code and a few unique options. Each new PLU
can be assigned a unique code number up to a maximum of 18-digits in length.
Labels can be printed from the PLU screen as well by pressing the label Print icon, Specific setup is
required for this feature. Refer to the section “Barcode Label Printing from SAM4POS” on page 341
in the appendix for details.
1. From the PROGRAM MODE main menu, touch PLU to view the PLU program selection window,
touch PLU to view the PLU programming options. Here you can add, edit or delete items as necessary.
2. All existing PLUs are listed. You can edit an existing PLU by scrolling through the PLU list to the
specific item you wish to edit.
Existing PLU’s
3. The double Up/Down Arrows go to the Beginning/End respectively; the single Up/Down Arrows
scroll Up/Down one page at a time.
4. Select a PLU from the list to edit the options, price or cost for the item.
5. Press the add record icon to add new items to the database or you can select an existing item to edit
as necessary. You can also copy an existing PLU by pressing and holding the PLU you want to copy.
To Next Page
