SaMASZ K2BF 210 - 3 Designation of Mower; Specifications

Operator’s manual
Front drum mower
K2BF 210; K4BF 265; K4BF 300
- 3 -
3. DESIGNATION OF MOWER
SaMASZ front drum mower is designed for mowing standing grass in meadows and in stone
free fields. It is a machine for hay and green fodder production. Meadow being mowed should be
even, previously prepared by rolling and other processing.
CAUTION :
It is forbidden to use the mower for purposes other than those listed in this
instruction. Using the mower for other purposes will be classified as use not
according with the intended use and could exclude the manufacturer from
responsibility from any resulting damages. The mower should be used,
serviced and repaired only by persons familiar with its characteristics and
with safety regulations. Unauthorized modification of the mower may release
the manufacturer from responsibility for any resulting malfunctions or
damages.
3.1. Specifications
Tab. 1. Technical data
Model K2BF 210 K4BF 265 K4BF 300
Working width 2.10 m 2.65 m 3.00 m
Number of drums
2 4 4
Number of knives 8 (2x4) 12 (4x3) 18 (2x5 + 2x4)
Working capacity ~2.50 ha/h ~3.00 ha/h ~3.50 ha/h
Transport lenght 1650 mm 1500 mm 1600 mm
Transport width 2300 mm 2700 mm 2950 mm
Operation width
2650 mm
3250 mm
3660 mm
Cutting speed 90.8 m/s 90.8 m/s
∅775 mm
91 m/s
∅613 m
90.7 m/s
Drum rotating speed 1620.5 rpm. 2531 rpm.
∅775 mm –
2070 rpm.
∅613 mm –
2587.5 rpm.
PTO shaft 380 Nm
Tractor power required
From 70 kW
(95 HP)
From 80 kW
(109 HP)
From 90 kW
(122 HP)
Tractor PTO rpm. 1000 rpm
3-point linkage category II
Weight 570 kg 780 kg 860 kg