SaMASZ K2BF 210 - Standard Equipment and Spare Parts; PTO Shaft Selection

Operator’s manual
Front drum mower
K2BF 210; K4BF 265; K4BF 300
- 6 -
3.4. Standard equipment and spare parts:
The mowers are sold with the following standard equipment:
 warranty card,
 operator’s manual with spare parts list and the Declaration of Conformity,
 cutting knives: 1 package (18 pcs),
 mounting lever for quick knife changing,
 holders for warning plate and lights,
 PTO shaft (Tab. 2),
 spray paint (150 ml).
Optional extra equipment:
 set of warning plates,
 spacer rings for mowing height adjustment,
 mowing drum push-plates.
CAUTION:
Optional extra equipment should be ordered separately.
3.5. PTO shaft selection
Tab. 2. PTO shafts. Manufacturer - Bondioli & Pavesi
Mower
Power Length Moment Symbol Sprzęgło
Notes
KM
mm
Nm
K2BF – 2,10 m
K4BF – 2,65 m
K4BF – 3,00 m
55 860-1200 380
8G4N086CE007002 (z=6)
Left overrunning clutch +
friction clutch = 1200 Nm
WET
8G4N086CE007001 (z=6)
Right overrunning clutch +
friction clutch = 1200 Nm
OET
8G4N086CE008001 (z=21)
Right overrunning clutch +
friction clutch = 1200 Nm
OET - Eastern European Tractors
WET - Western European Tractors
WET OET
Symbol WPT:
8G4N086CE007002
Symbol WPT:
8G4N086CE007001
8G4N086CE008001
Fig. 5. Choosing PTO shaft according to tractor’s PTO rpm direction (Tab. 2)
Use shaft with overrunning and friction clutch, slowly engaging machine’s nominal rears.
The mower can be adjusted according to tractor’s PTO rpm direction. Generally, the mower is
adjusted to work with WET tractors with right PTO rpm direction (looking from the operator).