Samebike T7 2019 - Operating the LCD Display; Display Settings

Operating the LCD Display
Turning the bike ON/OFF
Hold the mode button until the display turns
on
Increase Pedal Assist Level
Press up arrow button
Decrease Pedal Assist Level
Press down arrow button
Turn ON/OFF front lights
Hold the up arrow button for 2 seconds until
lights turn on, repeat to turn off
Toggle Odometer, Trip A, Trip B, Voltage,
Press and let go of the mode button
Current, Trip timer (TM)
When the bike has not been used for 10 consecutive minutes the display will automatically shut
down. The pedal assist and throttle features will no longer work when the display is turned off.
Display Settings
To change display settings hold the up and down arrows simultaneously to enter into the advanced
settings menu. In this menu clicking the mode button will toggle between each numbered setting. To
adjust the value of each setting click the up and down arrows accordingly.
Setting
Function
Default
Explanation
P01
Brightness
1
Backlight display
brightness. The
darkest level is 1, the
brightest level is 3.
P02
Distance Units
1
Distance Units. 0: KM;
1: MILE.
P05
Power Assist Level
5
Change the default
power assist from 1 to
5.
P08
Speed Limit
27
Speed limit. Range is
0-100.
The input data here
represents the
20