SAMLEX AMERICA INC. | 37
4.3.1 Example of Password Activation and Changing Bulk Current Setting for EVO-1212F / 1212F-
HW from Default Value of 20A to 50A
S e l e c t G r o u p
* C H A R G E C U R V E
Starting from any of the 5 Operating Mode Screens (shown at Figs
3.1 to 3.8), press Enter Key. Screen "Select Group, CHARGE CURVE"
as shown on the left will be displayed (Parameter Group 1 of "Select
Group" Menu Map, Fig 4.1)
Press Enter key to access 22 Parameter Screens under "Select
Parameter" Menu Map for Parameter Group 1 "Charge Curve" (Fig
4.2) [Parameters are detailed at Table 4.3 under Section 4.4.1].
S e l e c t G r o u p
* C H A R G E C U R V E
B U L K C U R R E N T
2 0 A
Screen "BULK CURRENT, 20A" as shown on the left will be displayed
(Screen No.1 of "Select Parameter" Menu Map for Parameter Group
1: CHARGE CURVE at Fig 4.2). Default current setting of 20A or
previously set value will be displayed.
Press Enter Key to change Bulk Current parameter setting. A Password
will be requested. Password will not be requested if disabled - see
Section 4.3.2).
P a s w o r d k e y i n
0 0 0 0
Password consisting of 4 digits "0000" will be requested as
shown on the left. The rst digit will have a blinking cursor
"_". Use Up /Down Keys to scroll to number 8 for the rst digit “8”
of the password. Momentarily press Enter Key (Short press). Digit 8
will be entered as the rst digit of the Password and the blinking cursor
will automatically move to the 2nd digit (0) to the right. As the next
digit in the Password “8052” is already “0”, momentarily press Enter
Key (Short press) to enter “0” in the second digit. The blinking cursor
will automatically move to the 3rd digit (0). Use Up /Down Keys to
scroll to number 5 for the 3rd digit “5” of the password “8052” and
momentarily press Enter Key (Short press). The blinking cursor will
automatically move to the 4th digit (0). Use Up /Down Keys to scroll
to number 2 for the 4th digit “2” of the password “8052”. Now keep
the Enter Key pressed continuously for longer time (3 to 4 sec) to
write the full password of 4 digits i.e. “8052”.
P a s w o r d c o r r e c t
Flashes twice when Password is correct. (8052)
P a s w o r d e r r o r ! !
Flashes twice when Password is not correct.
SECTION 4 | Parameter Setup
To Next Page
Loading...