Samlexpower SEC-1245A - Specifications

SPECIFICATIONS
PARAMETER SEC-1245A SEC-2425A
Nominal input voltage 120 VAC, 60 Hz 120 VAC, 60 Hz
Input voltage range 110 VAC to 125 VAC 110 VAC to 125 VAC
Output voltage, VDC
- Absorption / boost, Uo* 14.4* V or 14* V or 28.8* V or 28* V or
disabled* disabled*
- Float / maintenance, U* 13.5* V 27.0* V
Maximum charging current, I
- Normal operation 45 A 25 A
- Mute Mode 16 A to 18 A 8 A to 10 A
Duration for Absorption or 4 Hours or 8 Hours 4 Hours or 8 Hours
Boost Stage 2, Uo
Temperature compensation Yes. With sensor TF-500 Yes. With sensor TF-500
Wired Remote Panel(Optional) Yes. With 900-RC Yes. With 900-RC
Cooling By fan By fan
Protections
- Overload Yes Yes
- Short Circuit Yes Yes
- Reverse polarity Yes Yes
- Thermal overload Yes Yes
Output banks 2 2
Output connector Tubular hole (dia 8 mm) Tubular hole (dia 8 mm)
with set screw with set screw
Operating temperature range 0 to 40 C 0 to 40 C
Fuses
- AC input, 5 mmx20 mm 250 V, 12 A 250 V, 12 A
Time Delay
- DC output, Automotive 32 V, 30 A (2 pieces) 32 V, 20 A (2 pieces)
blade type (Bussmann, “ATC”)
Dimensions (L x W x H), mm 330 x 230 x 108 330 x 230 x 108
Weight 5 Kg. 5 Kg.
Notes
* The charging voltages shown are applicable at battery temperature of 80 F
The above specifications are subject to change without notice
Page 26