1-8 EB 8026 EN
Safety instructions and measures
NOTICE
!
Risk of valve damage due to the use of unsuitable tools.
Certain tools are required to work on the valve.
Î Only use tools approved by SAMSON (uAB0100).
Risk of valve damage due to the use of unsuitable lubricants.
The lubricants to be used depend on the valve material. Unsuitable lubricants may cor-
rode and damage surfaces.
Î Only use lubricants approved by SAMSON (uAB0100).
Risk of the process medium being contaminated through the use of unsuitable lubri-
cants and/or contaminated tools and components.
Î If necessary, keep the valve and the tools used free from solvents and grease.
Î Make sure that only suitable lubricants are used.
1.4 Warnings on the device
Warning sym-
bols
Meaning of the warning Location on the device
Warning against moving parts
There is a risk of injury to hands or ngers due to the
stroking movement of the actuator and plug stem if they
are inserted into the yoke while the air supply is con-
nected to the actuator.
To Next Page
Loading...
Need help?
General
