Samson 3244 - Removing Valve from Pipeline

11-2 EB 8026 EN
Removal
Before removing the valve, make sure the fol-
lowing conditions are met:
− The control valve is put out of operation
(see the 'Decommissioning' chapter).
11.1 Removing the valve from
the pipeline
1. Support the valve to hold it in place
when separated from the pipeline (see
the 'Shipment and on-site transport'
chapter).
2. Unbolt the ange joint.
3. Remove the valve from the pipeline (see
the 'Shipment and on-site transport'
chapter).
11.2 Removing the actuator
from the valve
See associated actuator documentation.