Samson 3321 - Actuator Nameplate; Material Number

EB 8111/8112 EN 13
Markings on the control valve
The valve nameplate (80) in valve sizes
DN15 to 15 or NPS½ to 2 is afxed to the
valve on the body ange (Fig.2). The name-
plate is afxed to the top of the bonnet in
valve sizes DN65 or NPS2½ and larger
(Fig.3).
80
80
Fig.2: Nameplate
on the body
Fig.3: Nameplate on
the bonnet
2.2 Actuator nameplate
See associated actuator documentation.
2.3 Material number
The seat and plug of the valves have an arti-
cle number written on them. Specifying this
article number, you can contact us to nd out
which material is used. Additionally, a seat
code is used to identify the trim material.
This seat code is specied on the nameplate
(17). For more details on the nameplate, see
section2.1.