Samson 3321 - Preparation for Return Shipment; Ordering Spare Parts and Operating Supplies

44 EB 8111/8112 EN
Servicing
7.4 Preparation for return ship-
ment
Defective valves can be returned to SAM-
SON for repair.
Proceed as follows to return valves to SAM-
SON:
1. Put the control valve out of operation (see
section9).
2. Decontaminate the valve. Remove any
residual process medium.
3. Fill in the Declaration on Contamination,
which can be downloaded from our
website at uwww.samson.de > Services
> Check lists for after sales service >
Declaration on Contamination.
4. Send the valve together with the lled-in
form to your nearest SAMSON subsidi-
ary. SAMSON subsidiaries are listed on
our website at uwww.samson.de >
Contact.
7.5 Ordering spare parts and
operating supplies
Contact your nearest SAMSON subsidiary
or the SAMSON After-sales Service depart-
ment for information on spare parts, lubri-
cants, and tools.
Spare parts
See section10.3 for details on spare parts.
Lubricant
Details on suitable lubricants can be found in
the document uAB0100.
Tools
Details on suitable tools can be found in the
document uAB0100.