Owners Manual12
AR2 Dock
USB DC Input1/8” Audio Output
For added convenience and easy setup, we have included the AR2D dock. To use the dock please follow these steps:
1. Slide the AR2 receiver into the AR2D dock. There are two keys on the rear of the AR2 that will match up and
align with the AR2D so that the receiver will t correctly.
2. Attach the included 1/8” to 1/4” audio cable to the audio output on the back panel of the AR2D.
3. To recharge the AR2 receiver, connect the USB Y-cable to the USB DC input on the back panel of the AR2D and
connect the cable to the included Universal AC adaptor.
To Next Page
Loading...
Need help?
General
