Samson AH2 User Manual

CE Declaration
We, Samson Technologies Corporation, located at 45 Gilpin Ave, Hauppauge, NY 11788 USA declare under our own responsibility that
these devices are in conformity with the essential requirements of R&TTE Directive 1999/5/EC when installed in accordance with the
installation instructions contained in the product documentation. To the eect that the standards and/or technical specications refer-
enced below have been applied as indicated:
EN 62479:20102
EN 60065: 2002+A1+A11+A2+A12
EN 301 489-1 V1.9.2
EN 301 489.9 V1.4.1
EN 300 422-1 V1.4.2
EN 300 422-2 V1.3.1
Year of CE Marking (Low Voltage Directive): 2014
The products shall contain the CE marking and shall be accompanied by the identication number of the Notied Body TÜV Rheinland
Product Safety GmbH 0197. This equipment will also carry the Class 2 equipment identier.
Signed on behalf of the manufacturer:
Douglas Bryant
Vice President Engineering
03/03/2014
0197

Samson AH2 Specifications

General

Brand	Samson
Model	AH2
Category	Receiver
Language	English