Expedition Pro XP300
12
Using one XP300 and an XP200 (stereo operation): In this example, microphones are connected to the XLR mic inputs of chan-
nels 1 and 2 of an XP300, and a stereo keyboard is connected to the stereo 1/4" TRS connector of channel 3/4 of the XP300 (using
a Y-cord, with the tip carrying the left signal and the ring carrying the right signal). A connection is then made between the Right
output of the XP300 to the XLR input of an XP200. IMPORTANT NOTE: When using the XP300 with additional Expedition Pro
enclosures, always be sure to set the XP300 Mono/Stereo switch to “Stereo.”
Using one XP300 and three XP200s (extended range stereo operation): In this example, microphones are connected to the
XLR mic inputs of channels 1 and 2 of an XP300, and a stereo keyboard is connected to the stereo 1/4" TRS connector of
channel 3/4 of the XP300 (using a Y-cord, with the tip carrying the left signal and the ring carrying the right signal). A connection
is then made between the Left output of the XP300 to the XLR input of an XP200 (both will then carry the same left channel sig
-
nal). Finally, a connection is made between the Right output of the XP300 and an XP200, and between that XP200’s XLR output
and the XLR input of a third XP200 (both will then carry the same right channel signal). IMPORTANT NOTE: When using the
XP300 with additional Expedition Pro enclosures, always be sure to set the XP300 Mono/Stereo switch to “Stereo.”
ENGLISH
12
To Next Page
Loading...
