Need help?Do you have a question about the Samson Q7x and is the answer not in the manual?
General| Type | Dynamic |
|---|---|
| Polar Pattern | Supercardioid |
| Impedance | 600 Ohms |
| Connector | XLR |
| Sensitivity | -54 dB |
Details on servicing requirements, Return Authorization (RA) number, and contact for warranty.
Contact details for questions or comments regarding the microphone.
Neodymium dynamic element for extended range, clear reproduction, and high sensitivity.
Supercardioid pattern for focused pickup, shock-mounting reduces handling noise.
Handles high SPL, tailored vocal frequency response, rugged construction.
Features gold-plated XLR connector and includes a mic clip.
Frequency response change based on microphone capsule position relative to the sound source.
Bass frequencies boost when mic is 0-2 inches from source; rolls off as distance increases.
Illustrates frequency response changes at different proximity distances.
Guidelines for sound source distances (close, medium, far) and their sonic effects.
Aim mic at source, keep unwanted sources at 135°, place close to source.
Maintain three times the distance between mics as from source to mic.
Do not cover the grill, as it affects performance and audio quality.
Defines how microphones accept or reject signals from different directions.
Tighter pickup pattern than cardioid, increasing side-to-side rejection.
Visual representation of the Q7x's pickup pattern at 1000Hz.
Tailored for vocals with mid-range lift and low-end roll-off, suitable for instruments too.
Graph showing the microphone's output across different frequencies.
Diagrams for connecting the microphone via standard Male XLR to Female XLR.
Wiring details for TS and TRS phone jacks to the female XLR.
Details on the microphone's dynamic element and neodymium magnet structure.
Specifies the frequency range (50 Hz – 16 kHz) and impedance (200 ohms).
Defines the supercardioid pattern and sensitivity (-55.2 dBV/pa).
Lists maximum SPL (147 dB) and the 3-pin XLR connector type.
Includes mic clip, dimensions (7.09" x 2.125"), and weight (0.92 lb).
Instructions to avoid mixing with household waste and use separate collection systems.
Private households can return used products free of charge to collection facilities or retailers.
Contact local authorities for correct disposal methods to ensure proper treatment.
Company address, phone number, and website for support and information.
To Next Page
