Samson RS10HD - Resound HD Components

Resound HD FRONT PANEL
1 Wide Dispersion Horn – 1 inch throat,
60 x 90 degree wide dispersion horn
provides extensive coverage and linear,
off axis response.
2
Titanium Compression Driver
– 1.4inch (34mm), Titanium diaphragm
with 1 inch opening.
3 Woofer
– Custom designed, heavy-duty,
low frequency driver provides deep
bass.
4 Handle – One of two, ultra over sized
carry handles. (RS15 HD, 15m HD and
215 HD only.)
5 Steel Grill
– Durable steel grill provides
protection for, and easy access to, LF
driver.
6 Shelf Port
– Precision tuned ports for
accurate and tight bass response.
7 Enclosure – Rugged wooden
enclosure durable carpet covering.
4
A
B
C
D
Resound HD Components
4
6
5
4
7
1 2 3
6
Resound HD REAR PANEL
A INPUT – Speakon input connector for
connecting to the output of a power
amplifier or powered mixer.
B EXTENSION
– Speakon parallel output
connector for connecting additional
Resound HD’s.
C INPUT – 1/4-inch phone input
connector for connecting to the output
of a power amplifier or powered mixer.
D EXTENSION
– 1/4-inch parallel output
for connecting additional Resound HD’s.
Note: For a detailed wiring diagram, see page 9
of this manual.