9Stage 200: Dual Handheld Wireless System
1. Status Indicator - This LED displays the operation mode:
Green Normal Operation
Amber Mute
Red Low Battery
2. Power/Mute Switch - Press and hold to turn the unit on or off.
Press and release to mute or unmute the transmitter.
3. Battery Compartment - Insert two standard AA (LR6) batteries
here, being sure to observe the plus and minus polarity
markings shown. Although rechargeable Ni-Cad batteries can be
used, they do not supply adequate current for more than four
hours.
WARNING: Do not insert the battery backwards; doing so can
cause severe damage to the VH200 and will void your warranty.
4. Battery Cover - Unscrew the battery cover and slide down to
open the VH200 battery compartment.
VH200 Transmitter Controls and Features
1
2
4
3
To Next Page
Loading...
