What to do if there is audio dropout in my Samson Microphone system?
If you are experiencing audio dropout with your Samson Microphone system, it might be because the transmitter is too far from the receiver. Try moving closer to the receiver or repositioning the antennas. Also, eliminate potential sources of RF interference like cell phones, cordless phones, lighting equipment, or computers.
Why is the audio distorted on my Samson Stage 200?
If you are getting distorted audio from your Samson Microphone system, check the receiver output level and the audio input device level. Also, check the VH200’s batteries and replace them if they are low. Another transmitter might be broadcasting on the same channel, so turn off any transmitters that may be causing interference.
How to fix no audio on Samson Microphone system?
If you're experiencing no audio with your Samson Microphone system, first turn on the VH200 transmitter using the Power/Mute switch and ensure the VH200 transmitter’s batteries are correctly installed. Confirm that the SR200 adaptor is correctly connected and plugged into an electrical outlet, and turn on the SR200 receiver. Make sure the SR200 output and audio input connections are securely connected, and ensure that the SR200 receiver and VH200 transmitters are in line of sight with one another. Finally, check the receiver and audio input device level controls.
Explains CAUTION, ATTENTION, and WARNING symbols related to electric shock and appliance safety.
Provides guidance on proper disposal of electronic products to protect the environment.
Details compliance with FCC rules, RFI mitigation, and RF exposure guidelines.
Outlines compliance with Industry Canada regulations for radio transmitters.
Lists 20 essential instructions for safe operation, cleaning, and maintenance.
Congratulates user, describes Stage 200 system features and intended applications.
Highlights key features like dual-handheld wireless, easy setup, and battery life.
Details the Power Switch, Indicators, Volume Controls, and Channel Labels.
Lists available channels, frequencies, and color-coded labels for transmitter matching.
Describes Antenna placement, DC Input, Audio Outputs, and SQUELCH Switch.
Explains the Status Indicator, Power/Mute Switch, Battery Compartment, and Cover.
Explains squelch function, its effect on range and noise, and how to set it.
Step-by-step guide for connecting power, audio outputs, and installing batteries.
Guide on setting amplifier volume, SR200 volume, and handling distortion.
Procedure for testing system coverage and RF signal strength in the performance area.
Explains unidirectional pickup pattern and how to avoid feedback.
Lists operating frequency, channels, range, temperature, and frequency response.
Details image rejection, dynamic range, output levels, power supply, and dimensions.
Outlines RF power, microphone element, battery life, current consumption, and dimensions.
Provides solutions for No Audio, Distorted Audio, Audio Dropout, and channel issues.
States product conformity with EC Directives and relevant standards.
General| Polar Pattern | Cardioid |
|---|---|
| Impedance | 600 Ohms |
| Color | Black |
| System Type | Wireless |
| Frequency Range | UHF |
| Operating Range | 100m |
| Outputs | 1/4" |
| Frequency Response | 15kHz |
To Next Page