8
1. Antenna - The antenna mountings allow full rotation for optimum placement. In normal
operation, both antennas should be placed in a vertical position. The antennas can be
folded down for convenience when transporting the SR412.
2. POWER DC IN - Connect the supplied 15-volt adapter here.
WARNING: Do not substitute any other kind of power adapter. Doing so can cause damage
to the SR412 and will void your warranty.
3. Unbalanced Outputs - Use the unbalanced, 1/4” jacks to connect the individual SR412
receivers to the line level inputs of a mixer, amplifier, or other audio equipment.
4. CHANNELS A & B Mixed Output -
This balanced, low impedance XLR jack carries a mix of
both the Channel A and Channel B receivers.
5. CHANNELS C & D Mixed Output - This balanced, low impedance XLR jack carries a mix of
both the Channel C and Channel D receivers.
6. MIXED OUT ALL CHANNELS - This balanced, low impedance XLR jack carries a mix of all four
receivers.
3 33 3
2 5 6
1
41
SR412 Receiver Rear Panel Features
To Next Page
Loading...
