15
XP800 • Portable PA System
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
XP800 Quick Start
9. If you notice that the LIMITER indicator is lighting constantly, turn the MASTER
volume down so that the indicator only lights occasionally during loud hits.
10. To add depth to the mix or smooth out the vocals, you can apply effects such as
reverb to channels 1–4. To do this, raise the EFFECTS level controls on the chan-
nel(s) to which you would like to add the effect.
11. Slowly turn up the effects SEND knob until the desired sound is reached.
12. To alter the tonal characteristic of the signal, you can adjust the LOW (bass) and
HIGH (treble) controls. If you find the audio too muddy, you may want to reduce the
LOW control. If you find that the audio sounds dull, you can increase the HIGH con-
trol. There is no right or wrong way to EQ a sound. You should listen to how the mix
sounds in the room and fine-tune to your liking.
To Next Page
Loading...
Need help?
General