Need help?Do you have a question about the Samson XP 106 and is the answer not in the manual?
Details compliance with FCC Rules and potential interference.
Evaluates device for general RF exposure requirements.
XLR/1/4" input for microphone, instrument, or line signal.
Controls the audio level for Channel 1 (Mic/Line).
3.5mm audio input for line level devices.
1/4" input for instruments or line level signals.
Controls the audio level for Channel 2 (MP3/Line).
Input for Samson Stage XPD1 digital wireless USB receiver.
Controls the audio level for the wireless input.
1/4" output for linking systems or powered speakers.
Controls the audio level for Bluetooth input.
Tone contour switch for music or spoken word.
Main power on/off switch for the unit.
Indicates when signal is close to distortion.
Displays the status of the battery charge level.
Port for connecting the supplied power adapter.
Displays the Bluetooth status of the XP106 system.
Enables Bluetooth pairing mode to connect audio devices.
Step-by-step guide for connecting Bluetooth devices to the XP106.
LED indicating operation mode and battery status.
Powers the unit on/off and initiates pairing mode.
Access point for the HXD1 battery compartment.
Compartment for inserting AA batteries.
Adjusts transmitter input sensitivity for optimal audio level.
Plugs into XP106, provides power and data transfer.
Initiates pairing mode for receiver and transmitter.
LED indicating pairing and operational status.
Connects XP106 LINE OUT to another powered speaker.
Connects multiple XP106 units for expanded sound.
To Next Page
General