14
The XP106 provides three different placement options for your specific
situation.
For maximum sound coverage the XP106
can be used with a standard 1
3
⁄8” speaker
stand. The speaker should be raised above
the heads of the listening audience. Take
care when placing the speaker on a stand,
to ensure that it is on a level, steady surface
and will not tip over.
Take care when placing the XP106 in direct sunlight for long periods of time,
as this may discolor or damage the unit.
Do not place the speaker on wet surfaces, as it can cause malfunction. If you
notice condensation on the unit, dry the speaker before using or storing.
Speaker Placement
To Next Page
Loading...
