19
XP106 • Portable PA System
Stage RXD1 Receiver Controls
1. USB Connector - Plugs into the USB 2.4GHz Wireless jack on
the rear panel of the XP106. The receiver can also plug directly
into a computer USB port and will be recognized as a USB
audio device. The unit passes audio to the device and receives
power from the device through this connector.
2. PAIR Switch - Press >5 seconds to enter pairing mode.
3. STATUS Indicator - This LED displays the operation mode:
Amber Normal Operation
Flashing Amber Pairing
No Light
Not Paired; Transmitter Out Of Range;
No Power
1
2
3
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
To Next Page
Loading...
