17
XP800 • Portable PA System
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
Plug the RXD1 USB receiver into
the Channel 4 USB jack labeled
WIRELESS.
On the wireless transmitter, place a
fresh set of AA (LR6) batteries in the
transmitter battery holder, taking care
to observe the polarity markings.
Turn the channel 4 LEVEL
knob on the XP800 completely
counterclockwise to 0, then
turn the POWER siwtch on the
XP800 to the ON position.
Turn on the power to the transmitter by
pressing and holding Power switch; the
indicator LED will light amber.
Stage XPD1 Wireless System (Optional)
To Next Page
Loading...
