3-1
3. Disassembly and Reassemble
3. Disassembly and Reassemble
This section describes the disassembly and reassembly sequences for this monitor.
WARNING: As this monitor has parts that are sensitive to static electricity, be careful when handling them.
3-1. Disassembly
Cautions: 1. Turn the monitor off before beginning the disassembly process.
2. Disassemble the monitor carefully as directed in the following procedures.
3. When disassembling the monitor, do not use any metal tools except for the provided jig.
Part Description Picture Description Screws
Stand
1. Place the monitor down onto a table
covered by a soft cloth and remove
the 4 screws from the stand.
2. Remove 4 screws.
To Next Page
Loading...
