4-14
4. Troubleshooting
4-6-3. Service Function Spec.
1. 1. Set the Brightness and Contrast to 0.
2. Press and hold the Enter and Source keys.
3. The SVC Function OSD appears.
*To exit from the SVC Function OSD, you have to turn the power off.
Panel Information
Software Version
Checksum
The SVC Function OSD consists of a 103 (Horizontal) x 82 (Vertical) Grid.
The SVC Function OSD consists of Panel Information, the Software Version and the Micom Checksum.
Navigating Menus
1. Press the (▼) key to move up and press the (▲) key to change the value of a selected.
To Next Page
Loading...
